Replacement FUJIFILM NP-80 Digital Camera Battery, NP-80 Battery

  • FUJIFILM NP-80 Battery

  • Item Number :  EDFU007G
  • Chemistry :  LI-ION
  • Volts :  3.7V
  • Capacity :  1600mAh
  • Dimension :  55.35x19.70x20.30mm
  • Color :  GREY
    Note: Brand new, best FUJIFILM NP-80 Batteries. 1 year warranty!
    Lithium FUJIFILM Camera Battery NP-80 Compatible with Battery Code:
    CTA DB-NP80 DELKIN DD/NP-80 DIGIPOWER BP-NP80 DURACELL DRF80
    ENERGIZER ER-D200 FUJIFILM NP-80 GP VFL002 HAHNEL HL-80
    HELIOS HS-DC80 KODAK KLIC-3000 KODAK NP80KLIC3000 KYOCERA 2100DG
    KYOCERA BP-1100R MAXELL DC3711 MONSTER MKH20P48 POLAROID PR-101DG
    RAYOVAC RV-DC2800 RICOH DB-20 RICOH DB-20L SAKAR BP-4800CL
    SANYO UR-211 Sony DFU002 Sony DFU002L08 Sony FNP80GY
    Sony NP80B9559 SUNPAK TAI-S1082-01 TOSHIBA PDR-BT1 TOSHIBA PDR-BT2
    TOSHIBA PDR-BT2A TOSHIBA PDR-BTI UNIROSS VB101745 VARTA P32
    VIVANCO BP-12A3
    FUJIFILM Digital Camera Battery NP-80 Fits Models:
    FUJIFILM FINEPIX 4800 ZOOM FUJIFILM FINEPIX 4800Z FUJIFILM FINEPIX 4900 ZOOM FUJIFILM FINEPIX 6800 ZOOM
    FUJIFILM FINEPIX 6900 ZOOM FUJIFILM MX-1700 FUJIFILM MX-2700 FUJIFILM MX-2900
    FUJIFILM MX-4900 FUJIFILM MX-6800 FUJIFILM MX-6900 KODAK DC4800
    Kodak DC4800 Zoom LEICA DIGILUX ZOOM RICOH CAPLIO RR1 RICOH RDC-6000
    RICOH RDC-7 RICOH RDC-7S Ricoh RDC-i500 TOSHIBA PDR-M4
    TOSHIBA PDR-M5 TOSHIBA PDR-M70

Taking care of new fujifilm np-80 battery pack


Normally, a new np-80 battery pack comes in a very low charge condition and must be fully charged before use. Refer to the user manual of your portable electronic equipment for charging instructions. A new lithium ion fujifilm np-80 battery pack needs to be fully charged and fully discharged or "cycled" as much as five times to condition them into performing at full capacity. Your equipment may report a fully charge condition in as short as 10 to 15 minutes when the new np-80 camera battery pack is being charged for the first time. This is a normal phenomenon especially for Nickel Cadmium (Ni-Cd) and Nickel Metal Hydride (Ni-MH) chemistries. When this happens, remove the fujifilm np-80 digital camera battery pack and let it cool down for about fifteen minutes then repeat the charging procedure. "Conditioning" (fully discharging and then fully charging) is necessary so as to maintain the optimum performance of a battery pack, and is recommended at least once a month particularly for Ni-Cd and Ni-MH batteries. Failure to do so could result in reduced charge capacity and can significantly shorten the np-80 rechargeable battery packs useful life. Lithium Ion np-80 batteries do not require conditioning. It is normal for a fujifilm digital camera battery pack to get warm when charging and during use. However, if the battery pack gets excessive hot, here may be a problem with the portable electronic equipments charging circuit and should therefore be checked by a qualified technician. Rechargeable batteries undergo self-discharging when left unused for long periods of time. This is normal particularly in the case of Ni-MH and Li-ion chemistries. For best results, always store a np-80 battery pack fully charged. It should be removed from the equipment and kept in a cool, dry and clean place. The amount of runtime a battery pack produces depends on the power requirements of components in your electronic equipment.